Why is the default size of Blender's primitiveCUBE 2m x 2m x 2m? I investigated why the default size of Blender's primitiveCUBE is 2m x 2m ...
千葉県北西部の小河川花見川の流域を散歩して、感じたことを記録しています。散歩のICT化に興味あり。
3つの興味 1 「趣味の散歩」のＩＣＴ化、高度化を図り、地域発見ツールとして開発すること。 2 このツールを使って、花見川流域の魅力、アイデンティティを徹底的に探ること。 3 得られた情報を少子高齢化時代のまちづくり、かわづくりに活かす方策（システム）を発見開発すること。
Chiba City Ningyozuka Tomb: Study materials for the original 3D shape restoration In order to restore the original 3D shape of Chiba City's...
Technical data: Chiba City Ningyozuka Tomb - 3D spatial display of the front land division line The front land division line of Chiba City'...
3D terrain model created from two aerial photographs Using VisualSFM and MeshLab (both free software), I created a 3D terrain model from tw...
The second significance of the land division lines at Ningyozuka Tomb in Chiba City Among the land division lines at Ningyozuka Tomb in Chi...
Interpretation of oblique aerial photographs of Ningyozuka Tomb in Chiba City A careful observation of an oblique aerial photograph of Ning...
3D model of observation record of house-shaped haniwa (Tonomura site, Iida City) I created a 3D model of the observation record of the hous...
It turns out that Ningyozuka Tomb in Chiba City was designed and constructed asymmetrically. Aerial photographs of the old topsoil of Ningy...
The meaning of the front land division line of Ningyozuka Tomb in Chiba City I examined the meaning of the front land division line of Ning...
Technical data: Three-dimensional spatial display of the circular mound land division lines of Ningyozuka Tomb in Chiba City The circular m...
Examining the meaning of the land division line of the circular rear mound of Ningyozuka Tomb in Chiba City Based on the theory of Yutaka N...
Slat armor stamp There are two versions of the Slat armor stamp: one before repair and one after repair. On the repaired stamp, the bow in ...
Aral Sea There was a description of the Aral Sea in "Travels in Uzbekistan" (a serial article in the magazine "Geography") by Keiji Nakaie ...
The height standard and land division line of Ningyozuka Tomb in Chiba City are the plan design drawing Based on Numazawa theory, I thought...
沼澤豊氏が作成した千葉市人形塚古墳の設計原理復元図に感銘を受ける
Impressed by the design principle reconstruction of Ningyozuka Tomb in Chiba City created by Yutaka Numazawa I was impressed by the design ...
3D contour model of Ningyozuka Tomb in Chiba City I created a pure shape 3D model of Ningyozuka Tomb in Chiba City, with only contour lines...
Learning about "The so-called land division line of Ningyozuka Tomb in Chiba City" by Numazawa Yutaka Based on the 24-part tumulus design p...
Shakhrisabz I enjoyed the Shakhrisabz section of "Travels in Uzbekistan" (a serial article in the magazine "Geography") by Keiji Nakaie and...
Boat-shaped Haniwa (Tonomura Site, Iida City) Observation Record 3D Model Unexpectedly, I came across a boat-shaped Haniwa with a person on...
Samarkand I enjoyed the Samarkand edition of "Travels in Uzbekistan" (serialized article in the magazine "Geography") by Nakaie Keiji et al...
3D model of Ningyozuka Tomb in Chiba City (main part) Based on the preliminary model work, I created a DEM with 0.1m pitch contour lines, a...
Stone rod (Hirahata site, Iida city) Observation record 3D model During my study of rituals, I developed a concern about stone rods, so I m...
Chiba City Ningyozuka Tomb - 3D model made from contour lines - Preliminary model I extracted 0.5m pitch contour lines from the contour map...
Bukhara I enjoyed the Bukhara edition of "Travels in Uzbekistan" (serialized article in the magazine "Geography") by Keiji Nakaie et al., a...
Deciphering the contour lines of Ningyozuka Tomb in Chiba City I am challenging myself to create a 3D model from the contour map of Ningyoz...
Khiva I enjoyed the Khiva edition of "Travels in Uzbekistan" (serialized article in the magazine "Geography") by Keiji Nakaie et al., and t...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 21 Ancestral spirits and stone stick rituals Study 21 “DOGU & SEKIBOU: Rituals and the Domestication of Soci...
Tashkent I enjoyed the Tashkent edition of "Travels in Uzbekistan" (a serialised article in the magazine "Geography") by Keiji Nakaie and o...
Looking back on blog activities in September 2024 I looked back on the activities of the blog "Walking the Hanami River Basin" in September...
「ブログリーダー」を活用して、クーラーさんをフォローしませんか？
Why is the default size of Blender's primitiveCUBE 2m x 2m x 2m? I investigated why the default size of Blender's primitiveCUBE is 2m x 2m ...
Looking back on blog activities in June 2025 I looked back on the activities of the blog "Walking the Hanami River Basin" in June 2025. Alm...
Anticlinal structure near Sarchahan, Iran (normal map version) After reading the article "Can you drink alcohol in Iran?" in the April issu...
Anticlinal structure near Sarchahan, Iran (interference color version) I read the article "Iran, the Earthquake Country" in the April issue...
Anticlinal structure topography near Sarchahan, Iran I learned about the current social conditions of Iran by reading the April issue of Ge...
Work log for inputting coordinates of artifacts on the distribution map of the shell layer on the north slope of the Ariyoshi Kita shell mo...
3D model of pitfall TP005 (Ariyoshikita Shell Mound, Chiba City) A 3D model of a pitfall that completely drops animals into a space they ca...
Archaeological stamp "Venus of Moravia" In my collection of archaeological stamps, I came across the "Venus of Moravia" stamp issued in 200...
Catchment area of a flood-prevention dam in Iran I read the article "Iranian clothing" in the April issue of Geography magazine and learne...
Imaginary image of deer hunting in a sinkhole I placed a 3D model of a deer in a 3D model of a sinkhole and created an imaginary image of a...
Terrain near the salt domes in Iran (interference color version) I learned about the state of modern Iranian society by reading the article...
Topography near the salt domes in Iran I learned about Iranian society by reading the article "The Mystery of Iranian Smiles and Greetings"...
3D model of TP008 (Ariyoshikita Shell Mound, Chiba City) I created a 3D model of a type of trap that restricts animals from moving in a sma...
The mountainous area southwest of Arak City, which is the route of the Trans-Iranian Railway I learned about transportation in Iran by read...
Work log for inputting coordinates of artifacts on the distribution map of the shell layer on the north slope of the Ariyoshi Kita shell mo...
Image of abatis installed in a sinkhole A 3D model of an abatis installed in a sinkhole was created. The abatis is thought to be a device t...
3D model of the sinkhole-shaped earth pit TP009 (Ariyoshi Kita Shell Mound, Chiba City) As the first example of the Jomon ruins 3D model cr...
Karez distribution topography near Sirjan, Iran I learned about Iran's karez (qanat) by reading the article "Home of Karez" in the April is...
Agriculture in Iran I learned about agriculture in Iran by reading the April issue of Geography magazine's article "Agriculture and Soil in...
A project to learn how to create 3D models of Jomon ruins I am starting a project to learn the skills to create accurate and good-looking 3...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 8 Taphonomy Study 8 “DOGU & SEKIBOU: Rituals and the Domestication of Society in Prehistoric Jomon” by Yasuhi...
3D model of observation record of five earrings (Karahori site, Higashi-Azuma-machi, Gunma Prefecture) I created a 3D model of the observat...
A look back at blog activities in June 2024 I looked back on the activities of the blog “Walking the Hanami River Basin” in June 2024. Afte...
3D model of observation record of carved wooden pillar (Karahori site, Higashi-Azuma-machi, Gunma Prefecture) I created a 3D model of the o...
Classification of all artifacts excavated from the shell layer on the north slope of the Ariyoshi Kita shell mound A classification of all ...
Viewing “Excavated Japanese Archipelago 2024” I visited the special exhibition “Excavated Japanese Archipelago 2024” at the Chiba Prefectur...
Preliminary classification of artifacts excavated from the shell layer on the north slope of the Ariyoshi Kita shell mound In order to faci...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 7 Learning about “Ritual Actions and Contexts” Study 7 “DOGU & SEKIBOU: Rituals and the Domestication of Soc...
Ariyoshikita Shell Mound North Slope Shell Layer 3D model of number of artifacts by grid and distribution by altitude A 3D model of number ...
Ariyoshikita Shell Mound North Slope Shell Layer: 3D model of the grid-based elevation distribution of artifacts (prototype) I have created...
3D model of observation record of Horinouchi-style spouted pottery (Chiba city,Kasori shell mounds) I created a 3D model of the observation...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 6 Learning about the new concept of “Materiality” in Western archaeology Study 6 “DOGU & SEKIBOU: Rituals an...
Memo: How to create a 3D bar graph with good visibility I sometimes create 3D models with bar graphs on a grid using Blender's CUBE. I made...
Ariyoshikita Shell Mound North Slope Shell Layer: Artifact Register Basic Input Completed The basic input of the artifact register for the ...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 5 Methodology of ritual archaeology Study 5 “DOGU & SEKIBOU: Rituals and the Domestication of Society in Pre...
3D model of observation record of Horinouchi-style pottery (Chiba city,Kasori shell mounds) I created a 3D model of the observation record ...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 4 The development of rituals and rites is the driving force behind social and economic revitalization Study ...
3D model of observation record of Kasori E-type pottery (Chiba city,Kasori shell mounds) I created a 3D model of the observation record of ...
谷口康浩著「土偶と石棒 儀礼と社会ドメスティケーション」学習 3 Ritual Practice and Material Culture Study 3 “DOGU & SEKIBOU: Rituals and the Domestication of Society in ...
3D model of observation records of Sori-type pottery (Chiba city, Kasori shell mounds) I created a 3D model of the observation records of S...
