Fabric Analysis of Shell Layer Cross-Sections (Test Analysis 5): South Shell Mound of Kasori Shell Mound I am currently testing fabric anal...
千葉県北西部の小河川花見川の流域を散歩して、感じたことを記録しています。散歩のICT化に興味あり。
3つの興味 1 「趣味の散歩」のＩＣＴ化、高度化を図り、地域発見ツールとして開発すること。 2 このツールを使って、花見川流域の魅力、アイデンティティを徹底的に探ること。 3 得られた情報を少子高齢化時代のまちづくり、かわづくりに活かす方策（システム）を発見開発すること。
Fabric Analysis of Shell Layer Cross-Sections (Test Analysis 5): South Shell Mound of Kasori Shell Mound I am currently testing fabric anal...
Visualization of Bivalve Shell Deviation Angle Distribution, Part 2 I also attempted to visualize the distribution of bivalve shell deviati...
Archaeological Stamps: Abu Simbel Temple, Part 5 I recently found two new archaeological stamps depicting the Abu Simbel Temple in my collec...
Visualization of Bivalve Shell Deviation Angle Distribution This document summarizes the visualization of bivalve shell deviation angle dis...
Observation Record 3D Model of the Bottom of a Kasori B-Type Pottery (Kasori Shell Mound, Chiba City) I enjoyed creating a 3D model of the ...
Fabric Analysis of Shell Layer Cross-Sections (Test Analysis 4) In two test spaces of shell layer cross-sections, the relationship between ...
Terminology Changes in Shell Layer Cross-Section Fabric Analysis I am conducting a fabric analysis on a 3D model of a stripped cross-sectio...
Observation Record 3D Model of Two Clay Figurines (Kasori Shell Mound, Chiba City) I created and observed 3D models of two clay figurines o...
Fabric Analysis of Shell Layer Cross Sections (Test Analysis 3) I am conducting a fabric analysis test using a stripped cross section of th...
Archaeological Stamps: Abu Simbel Temple, Part 4 I enjoyed discovering six new archaeological stamps depicting the Abu Simbel Temple and th...
小畑弘己著「縄文時代のタネとムシ」（福岡市史編集委員会）に興味を深める
Deepening my interest in "Seeds and Insects of the Jomon Period" by Hiromi Obata (Fukuoka City History Editorial Committee) I became partic...
ブログ「花見川流域を歩く」の150万ページビュー通過を感謝します
Thank you for helping my blog, "Walking the Hanami River Basin," reach 1.5 million page views. My blog, "Walking the Hanami River Basin," h...
加曽利貝塚南貝塚（貝層断面観覧施設）剥取断面の一部 観察記録3Dモデル
Kasori Shell Mound South Shell Mound (Shell Layer Cross-Section Viewing Facility): Partial Exfoliation Cross-Section - 3D Observation Recor...
Fabric Analysis of Shell Layer Cross Section (Test Analysis 2) Test analysis 2 of fabric analysis was conducted using a stripped cross sect...
Review of Blog Activities in April 2026 and Outlook for May This report reviews the activities of the blog "Walking the Hanami River Basin"...
Archaeological Stamps: Abu Simbel Temple, Part 3 I recently found two more archaeological stamps depicting the Abu Simbel Temple in my coll...
Pseudo-coordinate GIS Analysis using QGIS I have established the concept (technical repertoire) of pseudo-coordinate GIS analysis using QGI...
半分に割られた堀之内式土器のGigaMesh Software Framework展開
GigaMesh Software Framework Deployment of a Horinouchi-style Pottery Broken in Half I enjoyed deploying a 3D model of a Horinouchi-style po...
3D Model of Observation Records of Horinouchi-style Pottery (Kasori Shell Mound, Chiba City) I created a 3D model of observation records of...
Technical Memo: Principle of Drawing Intersection Lines Between Shell Layer Cross-Sections and Bivalve Shells (Clams) To measure the inclin...
Visiting the 2025 Excavation Report Exhibition at the Kasori Shell Mound Museum I visited the Kasori Shell Mound Museum and viewed the 2025...
Archaeological Stamps: Abu Simbel Temple, Part 2 I enjoyed finding three Egyptian archaeological stamps depicting the Abu Simbel Temple. アブ...
Fabric Analysis of Shell Layer Cross-Sections (Test Analysis) I conducted a test fabric analysis of shell layer cross-sections and identifi...
技術メモ 貝層剥取断面画像に見える地物大きさの視認性を向上させる画像処理
Technical Memo: Image Processing to Improve the Visibility of Surface Object Size in Shell Layer Cross-Sectional Images Through trial and e...
Basic Techniques for Shell Fabric Analysis of Shell Layer Cross Sections The first version of the basic digital techniques for performing s...
Visiting the Shell Layer Cross-Section Viewing Facilities at Kasori Shell Mound I visited the shell layer cross-section viewing facilities ...
Undertaking Section Diagram Tracing Work I am currently conducting a 3D analysis of the shell layer on the northern slope of the Ariyoshi K...
Supplementary Information: Types of Pottery Fragments Visible in Excavation Photograph I have identified the types of densely packed potter...
A Broad Perspective (Preliminary Interpretation) on the Shell Layer Development of the Northern Slope Shell Bed of the Ariyoshi Kita Shell ...
資料 第20断面における密集土器分布（予備解釈の裏付け資料）
Document: Distribution of Densely Concentrated Pottery in Section 20 (Supporting Document for Preliminary Interpretation) I previously made...
Preliminary Interpretation of Shell Layers and Densely Concentrated Pottery Distribution as Seen in Sections 4-6 I have noted down a prelim...
Document: Relationship between excavation photographs and dense pottery distribution map (Section 20) In Section 20, the correspondence bet...
Reasons for Failure in Creating a 3D Model of the Sonnou Shell Mound Cross Section A 3D model of the Sonnou Shell Mound cross section, exhi...
Earthset From the Lunar Far Side I was deeply inspired by the image of "Earthset From the Lunar Far Side" taken by NASA's Artemis mission, ...
Examination of the Description of the Fourth Section of the Shell Bed I have examined the fourth section of the shell bed on the north slop...
Observation Record 3D Model of Abalone-Shaped Pottery (Kasori Shell Mound, Chiba City) "Relive That Special Exhibition" Series In February ...
Examination of Section 4 I have begun a detailed examination of the shell bed strata in Section 4 of the Ariyoshi Kita Shell Mound's northe...
Archaeological Stamp: Abu Simbel Temple I possess several hundred unorganized Egyptian archaeological stamps. As part of organizing them, I...
3D Model of Observation Records of a Yayoi Period Jar (Kuriya Site, Yachiyo City) I enjoyed creating a 3D model of my observation records o...
Correspondence between 20 Cross-Sections and Excavation Site Photographs I strengthened my spatial awareness of the site by confirming the ...
Examination of the Description of Six Cross-Sectional Layers Regarding Section 6 of the shell midden on the northern slope of the Ariyoshi ...
Detailed Understanding of the Layer Division and Block Classification of 6 Cross-Sections Regarding the six cross-sections of the shell lay...
阿玉台式深鉢（八千代市ヲサル山遺跡）観察記録3DモデルのGigaMesh Software Framework展開
GigaMesh Software Framework Deployment of the 3D Model of the Observation Record of the Atamadai-style Deep Bowl (Osaruyama Site, Yachiyo C...
Observation Record 3D Model of the Atamadai-style Deep Bowl (Osaruyama Site, Yachiyo City) I enjoyed creating an observation record 3D mode...
Preliminary Interpretation Regarding the Shell Layer Deposition Mechanism I have been working on correlating shell layer divisions for each...
東内野型尖頭器2点外（八千代市権現後遺跡）観察記録3Dモデル
Observation Record 3D Model of Two Higashiuchino-type Projectile Points (Gongen-ushiro Site, Yachiyo City) I enjoyed creating a 3D model of...
Observation Record 3D Model of Two Tanged Projectile Points (Gongen-ushiro Site, Yachiyo City) I enjoyed creating 3D models of observation ...
Types of Pottery Fragments in Photographs of Excavation Sites (6 Sections) During the process of correlating shell layers between sections,...
March 2026 Blog Activity Review and April Outlook This post reviews the activities of the blog "Walking the Hanami River Basin" for March 2...
Archaeological Stamps: Archäologie in Deutschland, Issued in Germany I enjoyed stamp issued in Germany in 2002, themed "Archäologie in Deut...
3D空間における発掘状況写真の土器片と密集土器分布図の対応関係
Correspondence between pottery fragments in excavation photos and the distribution map of densely packed pottery in 3D space By observing t...
局部磨製石斧6点（八千代市芝山遺跡・坊山遺跡）観察記録3Dモデル
Observation Record 3D Model of 6 Partially Polished Stone Axes (Shibayama and Bouyama Sites, Yachiyo City) I enjoyed creating 3D models of ...
A Schematic Preliminary Interpretation of the Cross-Section I have been continuing my detailed analysis of the pottery-dense zone of the sh...
Sketchfabに投稿した3Dモデル1420件の日付入リスト作成
Creating a dated list of 1420 3D models uploaded to Sketchfab From 2019 to the present (2026), I have uploaded 1420 3D models to Sketchfab....
Archaeological stamp: Çatalhöyük site, issued by the Republic of Turkey I enjoyed this archaeological stamp featuring the Çatalhöyük site i...
顔面突起（八千代市赤作遺跡）観察記録3Dモデル Observation Record 3D Model of Face-Mounted Handle (Akasaku Site, Yachiyo City) I enjoyed creating an observation r...
Identification of the excavation site of 294 pottery fragments The excavation site of 294 pottery fragments (the largest pottery fragments ...
Identifying the Excavation Site of Pottery No. 359 By correlating photographic and plan view information of the pottery concentration zone ...
Correspondence between excavation photos of the pottery concentration zone and grid/cross-sections This document summarizes the corresponde...
五領ヶ台式土器2点のGigaMesh Software Framework展開
GigaMesh Software Framework Deployment of Two Goryogadai-style Pottery Pieces I enjoyed observing the patterns of two Goryogadai-style pott...
Observation Record 3D Model of Two Goryogadai-style Pottery Pieces (Kamiya Site, Yachiyo City) I enjoyed creating an observation record 3D ...
Analysis of Photographs of the Excavation Site of the Pottery Concentration Zone In the prominent pottery concentration zone on the norther...
考古学切手 モルドバの土偶（紀元前4千年紀） モルドバ共和国発行
Archaeological Stamp: Moldovan Clay Figurine (4th Millennium BC) - Issued by the Republic of Moldova I enjoyed acquiring this archaeologica...
人物埴輪 女子像 外（八千代市桑納2号墳）観察記録3Dモデル
Human Figure Haniwa (Female Figure) and Other (Kannou No.2 Tumulus, Yachiyo City) Observation Record 3D Model I enjoyed creating 3D models ...
3D Model of Polished Stone Axe (Osaruyama Site, Yachiyo City) - Observation Record This is a 3D model of the polished stone axe (Osaruyama ...
A Visual Variation Video of a Sunrise Scene Using the camera's bracketing function, I created six filtered images with a single shutter pre...
Creating Visual Variation Videos of Archaeological Artifacts I created visual variation videos using six filter images of archaeological ar...
3DF Zephyr Liteバージョンの違いによる結像精度向上の確認
Confirmation of Image Accuracy Improvements Due to Version Differences in 3DF Zephyr Lite I have confirmed that the image accuracy of the c...
注口付舟形鉢形土器（八千代市ヲサル山遺跡）観察記録3Dモデル
Observation Record 3D Model of a Boat-Shaped Bowl-Shaped Earthenware Vessel with a Spout (Osaruyama Site, Yachiyo City) I enjoyed creating ...
Preliminary Interpretation of the Shell and Soil Layer Structure of the Shell Layer on the North Slope of the Ariyoshi Kita Shell Mound I h...
Hard Drive Replacement for Backup My hard drive, which I use for my hobby activities, was full, so I replaced it with a larger capacity har...
Archaeological Stamp: Kasori Shell Mound Special Historic Site Designation Commemorative Frame Stamp I was lucky enough to acquire the Kaso...
Preliminary Interpretation of Shell Continuity in the Denudation Profile I have provided a preliminary interpretation of the shell depositi...
Viewing Paleolithic polished stone axes and other artifacts at the Yachiyo City Museum of Local History I viewed Paleolithic polished stone...
Distribution map of pottery fragment convexity direction from a shell layer exfoliation cross section on the northern slope of the Ariyoshi...
Archaeological Stamp: Göttbøre Idol, Issued in the Åland Islands I was delighted to find a clay figurine-themed stamp issued by the Åland I...
Illustratorの生成塗りつぶし（シェイプ）によるピカチュウ遊び（形状比較資料作成）
Pikachu Play Using Illustrator's Generative Shape Fill (Shape) (Creating a Shape Comparison Material) I used Illustrator's Generative Shape...
Mixing of Multiple Pottery Types in the Pottery Concentration Zone Distribution maps confirm that the three pottery types that make up the ...
3D Observation Record Models of Four Animal-Shaped Earthenware Figures (Yoshimidai Site, Sakura City) I created 3D observation record model...
Archaeological Stamps: Hand Axes, Arrowheads, etc. I enjoyed collecting stamps from my archaeological stamp collection depicting stone tool...
3D Model of Observation Records of Stone Crown (Gionbara Shell Mound, Ichihara City) I enjoyed creating a 3D model of the observation recor...
Technical Note: Photographing Exhibits for 3D Modeling When I photographed a double-mouthed pottery vessel on display in the special exhibi...
3D Model of Observation Records of a Dokkoishi (Miyauchi Idosaku Site, Sakura City) I enjoyed creating a 3D model of the observation record...
Reflecting on February 2026 Blog Activities I reflected on my February 2026 blog activities for "Walking the Hanami River Basin." While str...
Pottery Types in the Pottery Concentration Zone An examination of pottery types in the pottery concentration zone in the shell layer on the...
3D Models of Observation Records of Three Clay Earrings (Uchino Daiichi Site, Chiba City) I enjoyed creating 3D models of the observation r...
Three Geographical Stamps I bought a packet of 1,000 Soviet stamps and searched for archaeological stamps, but found none. They're not part...
3D Model of Observation Records of the Clay Tablet with a Human Face (Baba Site, Inzai City) I enjoyed creating a 3D model of the observati...
Fabric Observation in the Pottery Concentration Zone I conducted fabric observations of the pottery fragment deposits in the pottery concen...
An article about the 25th anniversary of InDesign caught my eye. I came across the words "Adobe InDesign Japanese Edition 25th Anniversary"...
Archaeological Stamps: Tambari Rock Art, Kazakhstan I enjoyed the Tambari rock art stamps issued by Kazakhstan. Two stamps were issued just...
打ち割られた石材と敲石・台石（袖ヶ浦市上宮田台遺跡）観察記録3Dモデル
3D Observation Record Model of Broken Stone, Hammerstone, and Base Stone (Kamimiyatadai Site, Sodegaura City) I created a 3D model of the o...
The pottery concentration zone I observed the prominent pottery concentration zone in the shell layer on the northern slope of the Ariyoshi...
Pottery Concentration Zones as Indicators for Shell Layer Correlation Several pottery concentration zones exist in the shell layers on the ...
Sri Lankan Archaeological Stamps I enjoyed these four Sri Lankan archaeological stamps. They feature designs of an Early Paleolithic stone ...
弥生時代中期 再葬墓出土の土器（市原市武士遺跡）観察記録3Dモデル
3D Model of Observation Records of Pottery Excavated from a Reburial Tomb in the Middle Yayoi Period (Takeshi Site, Ichihara City) I create...
Archaeological Stamp: Pottery Fragment with Handle A pottery fragment with handle stamp from a set of five archaeological stamps issued by ...
弥生時代前期 双口土器（富岡市上高田社宮子原遺跡）観察記録3Dモデル
3D Model of Observation Records for Early Yayoi Period Double-Mouthed Pottery (Kamitakata-Shakuzihara Site, Tomioka City) I created a 3D mo...
Examining Indicators for Shell Layer Correlation I conducted a preliminary 3D spatial analysis of the shell layers on the northern slope of...
Archaeological Stamps: Pottery with Human Face I searched through my archaeological stamp collection for archaeological stamps depicting po...
Fabric Analysis of Shell Layer Cross-Sections (Test Analysis 5): South Shell Mound of Kasori Shell Mound I am currently testing fabric anal...
Visualization of Bivalve Shell Deviation Angle Distribution, Part 2 I also attempted to visualize the distribution of bivalve shell deviati...
Archaeological Stamps: Abu Simbel Temple, Part 5 I recently found two new archaeological stamps depicting the Abu Simbel Temple in my collec...
Visualization of Bivalve Shell Deviation Angle Distribution This document summarizes the visualization of bivalve shell deviation angle dis...
Observation Record 3D Model of the Bottom of a Kasori B-Type Pottery (Kasori Shell Mound, Chiba City) I enjoyed creating a 3D model of the ...
Fabric Analysis of Shell Layer Cross-Sections (Test Analysis 4) In two test spaces of shell layer cross-sections, the relationship between ...
Terminology Changes in Shell Layer Cross-Section Fabric Analysis I am conducting a fabric analysis on a 3D model of a stripped cross-sectio...
Observation Record 3D Model of Two Clay Figurines (Kasori Shell Mound, Chiba City) I created and observed 3D models of two clay figurines o...
Fabric Analysis of Shell Layer Cross Sections (Test Analysis 3) I am conducting a fabric analysis test using a stripped cross section of th...
Archaeological Stamps: Abu Simbel Temple, Part 4 I enjoyed discovering six new archaeological stamps depicting the Abu Simbel Temple and th...
Deepening my interest in "Seeds and Insects of the Jomon Period" by Hiromi Obata (Fukuoka City History Editorial Committee) I became partic...
Thank you for helping my blog, "Walking the Hanami River Basin," reach 1.5 million page views. My blog, "Walking the Hanami River Basin," h...
Kasori Shell Mound South Shell Mound (Shell Layer Cross-Section Viewing Facility): Partial Exfoliation Cross-Section - 3D Observation Recor...
Fabric Analysis of Shell Layer Cross Section (Test Analysis 2) Test analysis 2 of fabric analysis was conducted using a stripped cross sect...
Review of Blog Activities in April 2026 and Outlook for May This report reviews the activities of the blog "Walking the Hanami River Basin"...
Archaeological Stamps: Abu Simbel Temple, Part 3 I recently found two more archaeological stamps depicting the Abu Simbel Temple in my coll...
Pseudo-coordinate GIS Analysis using QGIS I have established the concept (technical repertoire) of pseudo-coordinate GIS analysis using QGI...
GigaMesh Software Framework Deployment of a Horinouchi-style Pottery Broken in Half I enjoyed deploying a 3D model of a Horinouchi-style po...
3D Model of Observation Records of Horinouchi-style Pottery (Kasori Shell Mound, Chiba City) I created a 3D model of observation records of...
Technical Memo: Principle of Drawing Intersection Lines Between Shell Layer Cross-Sections and Bivalve Shells (Clams) To measure the inclin...
I made a Blender add-on for displaying relic databases in 3D space. I made an add-on for a database of relics with 3D coordinates that disp...
Technical information: Joining shell layer 3D models I confirmed how to join two shell layer 3D models that are in contact with each other....
Technical Document: Practical Use of Creating a 3D Shell Layer Model in Blender I made a note of the practical use of creating a 3D shell l...
Technical information: How to create a 3D shell layer model in Blender I have considered how to create a 3D shell layer model from a two-se...
King Tutankhamun's Golden Mask Stamps, Egypt-China Joint Issue Stamps I have a complete set of King Tutankhamun's Golden Mask stamps, joint...
A look back at blogging activities in April 2025 I looked back on my activities in April 2025 for the blog "Walking the Hanami River Basin....
3D distribution model of excavated artifacts from the sloping shell layer of the shell layer on the north slope of the Ariyoshi Kita Shell ...
Learning Blender's geometry nodes As a Blender beginner, I am engrossed in mastering the geometry nodes function. It is convenient because ...
I made a Blender addon for plotting a list of relics with 3D coordinates I made a Blender addon that plots a list of relics with 3D coordin...
3D pottery distribution model using 3D pottery fragment model I created a 3D pottery fragment model of a few centimeters and used it to cre...
Technical Note: How to generate an object from a point cloud I have confirmed five methods to convert the distribution shape of a point clo...
A boar jawbone and three hunting tools were unearthed in close proximity I discovered a place where a boar jawbone and three hunting tools ...
Slope shell layer division and bone/tooth 3D distribution model (density color expression version) I observed and analyzed the state of the...
Slope shell layer subdivision and pottery 3D distribution model (density color version) I observed and analyzed the slope shell layer subdi...
Slope shell layer subdivision and artifact 3D distribution model I observed and analyzed the slope shell layer subdivision and artifact dis...
I looked back on the activities of the blog "Walking the Hanami River Basin" in March 2025. Following on from January and February, I pushe...
Shell layer divisions and artifact distribution in 3D space The shell layer divisions and artifact distribution in the study space (3D spac...
3D model of all shell layers in the study space A 3D model of all shell layers in the study space of the shell layers on the north slope of...
Shell layer division I decided to divide the shell layers in the study area of the northern slope shell layer of the Ariyoshi Kita Shell ...
The significance of the brown shell layer sandwiched between the white shell layers When observing the cross-section of the shell layer on ...
