3D model of observation record of Ubayama II pottery (Kasori shell mound, Chiba city) A 3D model of the observation record of Ubayama II po...
千葉県北西部の小河川花見川の流域を散歩して、感じたことを記録しています。散歩のICT化に興味あり。
3つの興味 1 「趣味の散歩」のＩＣＴ化、高度化を図り、地域発見ツールとして開発すること。 2 このツールを使って、花見川流域の魅力、アイデンティティを徹底的に探ること。 3 得られた情報を少子高齢化時代のまちづくり、かわづくりに活かす方策（システム）を発見開発すること。
Colorization of 3D model created from U.S. military aerial photographs taken in 1949 A 3D terrain model created from an aerial photograph t...
速報 1949年撮影米軍空中写真から地形3Dモデル作成に成功
Breaking news: Successful creation of 3D terrain model from 1949 US military aerial photographs With the photogrammetry software 3DF Zephyr...
RealityCaptureの試用と3DF Zephyr Liteとの比較
Trial of RealityCapture and comparison with 3DF Zephyr Lite RealityCapture is now free, so I tried it out right away. When I compared it to...
Relic density representation and heat map representation in the Shell Layer I independently developed a 3D model that expresses the density...
Technical note: Intuitive representation of 3D density of relics I considered a method to intuitively express the density of relics distrib...
技術メモ Sketchfabへのアップロード能力比較 Blenderと3DF Zephyr
Technical note: Comparison of upload capabilities to Sketchfab: Blender and 3DF Zephyr I experienced the difference in the ability to uploa...
Artifact buffer representation in artifact 3D distribution map I set a buffer for the artifacts in the 3D artifact distribution map, and de...
3D distribution of artifacts by excavated stratigraphy (example) I created a 3D distribution document of artifacts by excavated stratigraph...
Initial-Jomon pottery decorated with dowel-impressed patterns (Iida City,Ishigyo site) observation record 3D model I created a 3D model of...
深鉢（埋甕）（伊那市御殿場遺跡）観察記録3Dモデル（2024年2月撮影版）
Deep bowl (Buried jar) (Ina City,Gotenba site) Observation record 3D model (Photographed in February 2024) I created a 3D model of a Deep b...
3D distribution of artifacts by classification in the slope shell layer I am conducting a preliminary examination of the 3D distribution of...
Prototype 3D distribution model of relics in the shell layer on the north slope of Ariyoshi Kita Shell Mound I created a prototype 3D distr...
深鉢型土器（飯田市天伯遺跡）観察記録3Dモデル（2024年3月撮影版）
Deep bowl-shaped pottery (Iida City,Tenpaku site) observation record 3D model (photographed in March 2024) I created a 3D model of deep bow...
April 2024 blog activity review I looked back on the April 2024 activities of my blog “Walking along the Hanami River Basin”. Progress has ...
顔面付釣手土器（飯田市北田遺跡）観察記録3Dモデル（2024年3月撮影版）
Observation record 3D model of Vessel with handles for suspension and a face (Iida City,Kitada site) (Photographed in February 2024) I had ...
顔面付釣手形土器（伊那市御殿場遺跡）観察記録3Dモデル（2024年2月撮影版）
Observation record 3D model of Vessel with handles for suspension and a face (Ina City,Gotenba site) (Photographed in February 2024) I crea...
技術メモ BlenderPythonによるオブジェクトの干渉色塗色
Technical memo Interference coloring of objects with BlenderPython I created a BlenderPython script with the help of ChatGPT that can paint...
顔面把手付大深鉢（伊那市月見松遺跡）観察記録3Dモデル(2024年2月撮影版）
Observation record 3D model of deep bowl with face handle (Ina City,Tsukimimatsu site) (Photographed in February 2024) I created a 3D model...
Interference color mask clay figurine 3D model It is very interesting to play with painting the clay figurine 3D model in interference colo...
Masked clay figurine head (Ina City,Hyakudangari site) observation record 3D model It's an impactful mask. Is it because the round mouth im...
Enjoy creating flip videos of the clay figurine on display I enjoyed the different colors of the exhibited clay figurine photos and created...
ガラスケース入り 土偶（飯田市大明神原遺跡）観察記録3Dモデル
Clay figurine in a glass case (Iida City,Daimyojinbara site) observation record 3D model I enjoyed creating a 3D model of a clay figurine i...
How to measure coordinates from a handwritten artifact distribution map image As the future of digitizing antiquities registers has become ...
Buried jar (Iida City,Hirahata site) observation record 3D model I enjoyed creating a 3D model of the buried jar (Iida City,Hirahata site) ...
Enjoying the manual input and computerization of a 38-year-old relic ledger I have become more and more passionate about learning about the...
Pottery with stand (Iida City,Hirahata site) Observation record 3D model I enjoyed creating a 3D model of pottery with stand (Iida City,Hir...
Enjoy creating a flip video of the Jomon pottery on display I enjoyed making a flip video of the images taken to create the 3D model using ...
Deep Bowl (Iida City,Kaito site) Observation Record 3D Model I enjoyed creating a 3D model of Deep Bowl (Iida City,Kaito site) displayed at...
Pottery with handle and stand (Iida City,Kuroda Daimyojinbara site) Observation record 3D model I created a 3D model of pottery with a handl...
How to write captions to images using Python I am now able to write captions to multiple images at once using Python. The previous Illustra...
3D document of photos of pottery exhibited at the Komagane City Museum “Collection Exhibition” I created a 3D document by adding captions t...
Vessel with handles for suspension (Iida City,Kurodakaito site) Observation record 3D model I enjoyed creating a 3D model of the vessel wit...
加曽利貝塚博物館企画展「あれもE・・・」展示全土器写真の3D空間配置（直列配置）
3D spatial arrangement (serial arrangement) of all the pottery photos exhibited at the Kasori Shell Mound Museum special exhibition “That's...
Ina-City Souzou-kan Permanent Exhibition Room 3D model I created a 3D model of the interior space of the permanent exhibition room of the I...
加曽利貝塚博物館企画展「あれもE・・・」展示全土器写真の3D空間配置
3D spatial arrangement of all the pottery photos exhibited at the Kasori Shell Mound Museum special exhibition “That's also E...” Photograp...
埋め甕（加曽利E式土器）（駒ケ根市的場・門前遺跡）観察記録3Dモデル
Burial jar (Kasori E-style pottery) (Komagane City,Matoba/Monzen site) Observation record 3D model I had fun creating a 3D model of a buria...
Red stereoscopic image of a point I enjoyed creating a red stereoscopic image of a point (No. 18 Yugamine rhyolite) (Minamiminowa village, ...
Observation record 3D model of two clay figurines (Komagane City, Hinatazaka site) I had fun creating 3D models of two clay figurines on di...
人面土器（小型深鉢形土器）（駒ケ根市高見沢遺跡）観察記録3Dモデル
Human-faced pottery (small deep pot-shaped pottery) (Komagane City Takamizawa site) Observation record 3D model I had fun creating a 3D mod...
加曽利貝塚博物館企画展「あれもE・・・」展示全土器写真の3D空間整理
3D spatial arrangement of photos of all the pottery exhibited at the Kasori Shell Mound Museum special exhibition “That's also E...” I crea...
Review of blog activities in March 2024 I looked back on the March 2024 activities of my blog “Walking along the Hanami River Basin”. The m...
尖頭器（No.18 下呂石）（南箕輪村神子柴遺跡） 観察記録3Dモデル
Point (No. 18 Yugamine rhyolite) (Minamiminowa village,Mikoshiba site) Observation record 3D model In connection with my visit to the Mikos...
Viewing the Komagane City Museum “Collection Exhibition” I went to see the “Collection Exhibition“ being held at the Komagane City Museum. ...
Site visit to Mikoshiba I visited the Mikoshiba site in Minamiminowa Village, Nagano Prefecture. The site are said to date from the end of ...
加曽利貝塚博物館企画展「あれもE・・・」展示状況写真の整理方法検討
Considering how to organize the exhibition status photos taken at the Kasori Shell Mound Museum special exhibition “That's also E...” I hav...
3D model of Tenryu River basin topography based on red 3D map I created a 3D model of the Tenryu River basin topography using a red 3D map ...
天竜川流域地形模型（飯田市美術博物館展示）の3Dモデル作成を楽しむ
Enjoy creating a 3D model of the Tenryu River Basin Topographic Model (Iida City Art Museum Exhibition) A huge topographical model of the T...
加曽利貝塚博物館企画展「あれもE・・・」展示土器写真の整理方法検討
Consideration of how to organize photographs of pottery exhibited at the Kasori Shell Mound Museum special exhibition “That's also E...” I ...
Impressed by the Jomon red lacquered bowl made of zelkova While talking with Shinjiro on Twitter, he showed me a photo of a panel of a red l...
Image representation example of the distribution of the number of artifacts by 3D grid in a shell mound I created an image representation e...
加曽利EⅢ式土器（025）（香取市多田遺跡）観察記録3Dモデル
Kasori EIII style pottery (025)(Katori City,Tada Site) Observation record 3D model I created a Observation record 3D model of Kasori EIII s...
加曽利EⅠ式土器（006）（銚子市粟島台遺跡）観察記録3Dモデル
Kasori EI style pottery (006)(Choshi City,Awashimadai Site) Observation record 3D model I created a Observation record 3D model of Kasori E...
February 2024 blog activity review I looked back on the February 2024 activities of my blog 'Walking along the Hanami River Basin '. The t...
加曽利EⅠ式土器（091）（東金市・大網白里市養安寺遺跡）観察記録3Dモデル
Kasori EI style pottery (091)(Togane City/Oami Shirasato City,Yoanji Site) Observation record 3D model I created a Observation record 3D mo...
変容した勝坂式土器（052）（横芝光町東長山野遺跡）観察記録3Dモデル
Transformed Katsusaka style pottery (052) (Yokoshibahikari Town,Higashinagayamano Site) Observation record 3D model I created a Observation...
Creating a 3D grid cover for the shell layer on the north slope of Ariyoshi Kita Shell Mound I created a 3D grid cover for the shell layer ...
5 transformed Katsusaka-style pottery, etc. Exhibition status 3D model I created 3D model of the 5 transformed Katsusaka-style pottery, etc...
Nakabyo type pottery (066) (Togane City,Hado Site) Observation record 3D model I created an Observation record 3D model of Nakabyo type pot...
加曽利EⅠ式土器（058）（横芝光町東長山野遺跡）観察記録3Dモデル
Kasori EI style pottery (058) (Yokoshibahikari Town,Higashinagayamano Site) Observation record 3D model I created an Observation record 3D ...
I learned that Ibokusago dashi school lunch was held. The main shellfish species at the Jomon shell midden in Chiba Prefecture is the Iboki...
加曽利EⅠ式土器（017）（東庄町神代夏方遺跡）観察記録3Dモデル
Kasori EI style pottery (017) (Tonosho Town,Jindainatukata Site) Observation record 3D model I created an Observation record 3D model of Ka...
Northern slope shell layer of Ariyoshi Kita Shell Mound 3D model of 3D mesh cover I created two types of 3D models of 3D mesh covers to exp...
3D mesh cover of the north slope shell layer of Ariyoshi Kita Shell Midden I have begun work on digitizing the 38 years ago relics ledger (...
大木式の要素を持つ加曽利E式土器（074）（東金市・大網白里市養安寺遺跡） 観察記録3Dモデル
Kasori E-style pottery with Daigi style elements (074) (Togane City/Oami Shirasato City,Yoanji Site) Observation record 3D model I created ...
BlenderPython learning begins to accelerate I found a BlenderPython learning reference book that was perfect for my learning level. For the...
大木式の要素を持つ加曽利E式土器等5点 展示状況素3Dモデル
5 pieces of Kasori E style pottery with Daigi style elements Exhibition status 3D model I created 3D models of the 5 pieces of Kasori E sty...
Review of blog activities from December 2023 to January 2024 I looked back on the activities of my blog 'Walking along the Hanami River Bas...
3D graph of frequency distribution of artifacts excavated by altitude I took on the challenge of creating a 3D graph of the frequency distr...
加曽利EⅢ式土器（043）（芝山町古宿・上谷遺跡） 観察記録3Dモデル
Kasori EⅢ style pottery (043) (Shibayama Town,Hurujuku/Kamisaku Site) Observation record 3D model I created a Observation record 3D model o...
Examination of frequency distribution of digitized relic register data by altitude I created an altitude frequency distribution graph using...
Nefertiti pattern stamp issued by Egypt Recently, I acquired two types of Nefertiti pattern stamps issued by Egypt. One of these has a "Pal...
加曽利EⅠ式土器（009）（銚子市粟島台遺跡） 観察記録3Dモデル
Kasori EI style pottery (009) (Choshi City,Awasimadai Site) Observation record 3D model I created a Observation record 3D model of Kasori E...
38年前遺物台帳（63000遺物）電子化日誌（2024.01.25）
38 years ago relics ledger (63000 relics) Digitized diary (2024.01.25) I have begun work on digitizing the 38 years ago relics ledger (Ariy...
3 pieces of Kasori EⅠ style pottery, exhibition status 3D model I created 3D models of 3 pieces of Kasori EⅠ style pottery that is on disp...
千葉市埋蔵文化財調査センター特別展関連講座「幸福を祈る-古代人の願いと造形」のzoom受講
Zoom lecture on "Praying for Happiness - The Wishes and Creations of the Ancients" related to the special exhibition of the Chiba City Bur...
Attendance at the Jomon period research course “Jomon period in Chiba city seen through GIS” I attended the 3rd Kasori Shell Mound Museum J...
加曽利EⅠ式土器（094）（東金市・大網白里市養安寺遺跡） 観察記録3Dモデル
Kasori EI style pottery (094) (Togane City/Oamishirasato City,Yoanji Site) Observation record 3D model I created a Observation record 3D mo...
38年前遺物台帳（63000遺物）電子化日誌（2024.01.18）
38 years ago relics ledger (63000 relics) Digitized diary (2024.01.18) I have begun work on digitizing the 38 years ago relics ledger (Ariy...
4 pieces of Kasori EⅠ style pottery, exhibition status 3D model I created 3D models of 4 pieces of Kasori EⅠ style pottery that is on disp...
On passing the 13th anniversary of the establishment of the blog The blog "Walking in the Hanami River Basin" has passed its 13th anniversa...
Enjoy the Sudanese Archaeological Research Stamp (published by East Germany in June 1970) I acquired seven East German stamps commemorating...
How to create color-coded maps of foreign administrative areas using QGIS I had the opportunity to use QGIS to create a color-coded adminis...
38年前遺物台帳（63000遺物）電子化日誌（2024.01.11）
38 years ago relics ledger (63000 relics) Digitized diary (2024.01.11) I have begun work on digitizing the 38 years ago relics ledger (Ariy...
変容した勝坂式土器（072）（東金市羽戸遺跡） 観察記録3Dモデル
Transformed Katsusaka-style pottery (072) (Togane City,Hado Site) Observation record 3D model I created a Observation record 3D model of Tr...
Resuming learning about the north slope shell layer of the Ariyoshi Kita Shell Mound I will resume learning about the north slope shell lay...
Be aware of Markdown notation I suddenly noticed that the description in the Sketchfab description field was in Markdown notation. Markdown ...
6 items including transformed Katsusaka-style pottery, exhibition status 3D model I created a 3D model of the six exhibits, including the t...
変容した勝坂式土器（085）（東金市・大網白里市養安寺遺跡） 観察記録3Dモデル
Transformed Katsuzaka-style pottery (085) (Togane City/Oami Shirasato City,Yoanji Site) Observation record 3D model I created a Observation...
4 items including transformed Katsusaka-style pottery, exhibition status 3D model I created a 3D model of the four exhibits, including the ...
2024 Happy New Year. As we enter the new year, I wish you good health and happiness. This year as well, I would like to develop interest-se...
Looking back on my hobby activities in 2023 New Year's Eve 2023 has arrived. 2023 is the year when the coronavirus pandemic ends. At the sa...
中峠類型（014）（東庄町神代夏方遺跡） 観察記録3Dモデル
Nakabyo type pottery (014) (Tonosho Town,Jindainatsukata Site ) Observation record 3D model I created a Observation record 3D model of Naka...
3 items including Nakabyo type 3D model of exhibition situation I created 3D models of the exhibition situation of three items, including t...
大木8a式土器（003）（銚子市粟島台遺跡）観察記録3Dモデル
Daigi 8a style pottery (003) (Choshi City,Awashimadai Site ) Observation record 3D model I created a Observation record 3D model of Daigi 8...
A total of 9 pieces of Daigi 8a style pottery and pottery influenced by it Exhibition status 3D model I created a 3D models of the the exh...
Comparison of seal impressions on two pieces of earthenware "Fuku" When I enlarged and compared the seal impressions of the stamped earthen...
Viewing the Kasori Shell Mound Museum special exhibition "That's also E..." I went to see the Reiwa 5th annual special exhibition, "That's ...
施印土器「福」3点（千葉市南河原坂窯跡群） 展示状況素3Dモデル
3 pieces of stamped earthenware "Fuku" (Chiba City,Minamikawarasaka kiln ruins) Exhibition status 3D model I created a 3D model of the exhi...
Lecture at the Oyumino History Enthusiasts Association Daizenno Minami Shell Mound learning On December 19, 2023, I gave a lecture on Daize...
Pit dwelling floor structure and furnace structure of the late Daizenno Minami Shell Mound settlement For the past two weeks, I have concen...
「ブログリーダー」を活用して、クーラーさんをフォローしませんか？
3D model of observation record of Ubayama II pottery (Kasori shell mound, Chiba city) A 3D model of the observation record of Ubayama II po...
Interim report of joint research on shell mounds with shell mound researchers I have been conducting joint research on shell mounds with Ma...
Angyo 3b pottery (Kasori shell mound, Chiba city) observation record 3D model A 3D model of the observation record of Angyo 3b pottery from...
Angyo 3c pottery (Kasori shell mound, Chiba city) observation record 3D model I created a 3D model of the observation record of Angyo 3c po...
3D model of observation record of stone pendant (Kasori shell mound, Chiba city) A 3D model of the observation record of a tiny (approximat...
3D model of observation record of Ubayama-style pottery (Kasori shell mound, Chiba city) I created a 3D model of the observation record of ...
A completely new way to use Blender: a 3D distribution thinking tool I've come up with a completely new way to use Blender. It's a way to u...
Technical information: The principle behind Blender's closed edge loops bridging I use closed edge loops bridging as the main tool for crea...
I made a Blender add-on for displaying relic databases in 3D space. I made an add-on for a database of relics with 3D coordinates that disp...
Technical information: Joining shell layer 3D models I confirmed how to join two shell layer 3D models that are in contact with each other....
Technical Document: Practical Use of Creating a 3D Shell Layer Model in Blender I made a note of the practical use of creating a 3D shell l...
Technical information: How to create a 3D shell layer model in Blender I have considered how to create a 3D shell layer model from a two-se...
King Tutankhamun's Golden Mask Stamps, Egypt-China Joint Issue Stamps I have a complete set of King Tutankhamun's Golden Mask stamps, joint...
A look back at blogging activities in April 2025 I looked back on my activities in April 2025 for the blog "Walking the Hanami River Basin....
3D distribution model of excavated artifacts from the sloping shell layer of the shell layer on the north slope of the Ariyoshi Kita Shell ...
Learning Blender's geometry nodes As a Blender beginner, I am engrossed in mastering the geometry nodes function. It is convenient because ...
I made a Blender addon for plotting a list of relics with 3D coordinates I made a Blender addon that plots a list of relics with 3D coordin...
3D pottery distribution model using 3D pottery fragment model I created a 3D pottery fragment model of a few centimeters and used it to cre...
Technical Note: How to generate an object from a point cloud I have confirmed five methods to convert the distribution shape of a point clo...
A boar jawbone and three hunting tools were unearthed in close proximity I discovered a place where a boar jawbone and three hunting tools ...
Colorization of 3D model created from U.S. military aerial photographs taken in 1949 A 3D terrain model created from an aerial photograph t...
Breaking news: Successful creation of 3D terrain model from 1949 US military aerial photographs With the photogrammetry software 3DF Zephyr...
Trial of RealityCapture and comparison with 3DF Zephyr Lite RealityCapture is now free, so I tried it out right away. When I compared it to...
Relic density representation and heat map representation in the Shell Layer I independently developed a 3D model that expresses the density...
Technical note: Intuitive representation of 3D density of relics I considered a method to intuitively express the density of relics distrib...
Technical note: Comparison of upload capabilities to Sketchfab: Blender and 3DF Zephyr I experienced the difference in the ability to uploa...
Artifact buffer representation in artifact 3D distribution map I set a buffer for the artifacts in the 3D artifact distribution map, and de...
3D distribution of artifacts by excavated stratigraphy (example) I created a 3D distribution document of artifacts by excavated stratigraph...
Initial-Jomon pottery decorated with dowel-impressed patterns (Iida City,Ishigyo site) observation record 3D model I created a 3D model of...
Deep bowl (Buried jar) (Ina City,Gotenba site) Observation record 3D model (Photographed in February 2024) I created a 3D model of a Deep b...
3D distribution of artifacts by classification in the slope shell layer I am conducting a preliminary examination of the 3D distribution of...
Prototype 3D distribution model of relics in the shell layer on the north slope of Ariyoshi Kita Shell Mound I created a prototype 3D distr...
Deep bowl-shaped pottery (Iida City,Tenpaku site) observation record 3D model (photographed in March 2024) I created a 3D model of deep bow...
April 2024 blog activity review I looked back on the April 2024 activities of my blog “Walking along the Hanami River Basin”. Progress has ...
Observation record 3D model of Vessel with handles for suspension and a face (Iida City,Kitada site) (Photographed in February 2024) I had ...
Observation record 3D model of Vessel with handles for suspension and a face (Ina City,Gotenba site) (Photographed in February 2024) I crea...
Technical memo Interference coloring of objects with BlenderPython I created a BlenderPython script with the help of ChatGPT that can paint...
Observation record 3D model of deep bowl with face handle (Ina City,Tsukimimatsu site) (Photographed in February 2024) I created a 3D model...
Interference color mask clay figurine 3D model It is very interesting to play with painting the clay figurine 3D model in interference colo...
Masked clay figurine head (Ina City,Hyakudangari site) observation record 3D model It's an impactful mask. Is it because the round mouth im...
